SmCo Magnet
| Sintered SmCoandriambyToetra ara-batana | |||||||||
| KEVITRA | kilasy | Remanence | Rev. Temp.- Coeff. Ny Br | Hery fanerena | Hery fanerena Intrinsic | Rev. Temp.-Coeff. Ny Hcj | Max. Vokatra angovo | Max. Temperature miasa | hakitroky |
| Br (KGs) | Hcb (ANAO) | Hcj (ANAO) | (BH) max. (MGOe) | g/cm³ | |||||
| SmCo5 | XG16 | 8.1-8.5 | -0,050 | 7.8-8.3 | 15-23 | -0.30 | 14-16 | 250 ℃ | 8.3 |
| XG18 | 8.5-9.0 | -0,050 | 8.3-8.8 | 15-23 | -0.30 | 16-18 | 250 ℃ | 8.3 | |
| XG20 | 9.0-9.4 | -0,050 | 8.5-9.1 | 15-23 | -0.30 | 19-21 | 250 ℃ | 8.3 | |
| XG22 | 9.2-9.6 | -0,050 | 8.9-9.4 | 15-23 | -0.30 | 20-22 | 250 ℃ | 8.3 | |
| XG24 | 9.6-10.0 | -0,050 | 9.2-9.7 | 15-23 | -0.30 | 22-24 | 250 ℃ | 8.3 | |
| XG16S | 7.9-8.4 | -0,050 | 7.7-8.3 | ≥23 | -0.28 | 15-17 | 250 ℃ | 8.3 | |
| XG18S | 8.4-8.9 | -0,050 | 8.1-8.7 | ≥23 | -0.28 | 17-19 | 250 ℃ | 8.3 | |
| XG20S | 8.9-9.3 | -0,050 | 8.6-9.2 | ≥23 | -0.28 | 19-21 | 250 ℃ | 8.3 | |
| XG22S | 9.2-9.6 | -0,050 | 8.9-9.5 | ≥23 | -0.28 | 21-23 | 250 ℃ | 8.3 | |
| XG24S | 9.6-10.0 | -0,050 | 9.3-9.9 | ≥23 | -0.28 | 23-25 | 250 ℃ | 8.3 | |
| Sm2Co17 | XG24H | 9.5-10.2 | -0,025 | 8.7-9.6 | ≥25 | -0.20 | 22-24 | 350 ℃ | 8.3 |
| XG26H | 10.2-10.5 | -0.030 | 9.4-10.0 | ≥25 | -0.20 | 24-26 | 350 ℃ | 8.3 | |
| XG28H | 10.3-10.8 | -0.035 | 9.5-10.2 | ≥25 | -0.20 | 26-28 | 350 ℃ | 8.3 | |
| XG30H | 10.8-11.0 | -0.035 | 9.9-10.5 | ≥25 | -0.20 | 28-30 | 350 ℃ | 8.3 | |
| XG32H | 11.0-11.3 | -0.035 | 10.2-10.8 | ≥25 | -0.20 | 29-32 | 350 ℃ | 8.3 | |
| XG22 | 9.3-9.7 | -0.020 | 8.5-9.3 | ≥18 | -0.20 | 20-23 | 300 ℃ | 8.3 | |
| XG24 | 9.5-10.2 | -0,025 | 8.7-9.6 | ≥18 | -0.20 | 22-24 | 300 ℃ | 8.3 | |
| XG26 | 10.2-10.5 | -0.030 | 9.4-10.0 | ≥18 | -0.20 | 24-26 | 300 ℃ | 8.3 | |
| XG28 | 10.3-10.8 | -0.035 | 9.5-10.2 | ≥18 | -0.20 | 26-28 | 300 ℃ | 8.3 | |
| XG30 | 10.8-11.0 | -0.035 | 9.9-10.5 | ≥18 | -0.20 | 28-30 | 300 ℃ | 8.3 | |
| XG32 | 11.0-11.3 | -0.035 | 10.2-10.8 | ≥18 | -0.20 | 29-32 | 300 ℃ | 8.3 | |
| XG26M | 10.2-10.5 | -0.035 | 8.5-9.8 | 12-18 | -0.20 | 24-26 | 300 ℃ | 8.3 | |
| XG28M | 10.3-10.8 | -0.035 | 8.5-10.0 | 12-18 | -0.20 | 26-28 | 300 ℃ | 8.3 | |
| XG30M | 10.8-11.0 | -0.035 | 8.5-10.5 | 12-18 | -0.20 | 28-30 | 300 ℃ | 8.3 | |
| XG32M | 11.0-11.3 | -0.035 | 8.5-10.7 | 12-18 | -0.20 | 29-32 | 300 ℃ | 8.3 | |
| XG24L | 9.5-10.2 | -0,025 | 6.8-9.0 | 8-12 | -0.20 | 22-24 | 250 ℃ | 8.3 | |
| XG26L | 10.2-10.5 | -0.035 | 6.8-9.4 | 8-12 | -0.20 | 24-26 | 250 ℃ | 8.3 | |
| XG28L | 10.3-10.8 | -0.035 | 6.8-9.6 | 8-12 | -0.20 | 26-28 | 250 ℃ | 8.3 | |
| XG30L | 10.8-11.5 | -0.035 | 6.8-10.0 | 8-12 | -0.20 | 28-30 | 250 ℃ | 8.3 | |
| XG32L | 11.0-11.5 | -0.035 | 6.8-10.2 | 8-12 | -0.20 | 29-32 | 250 ℃ | 8.3 | |
| Fanamarihana: · Mitoetra ho toy ny etsy ambony ihany izahay raha tsy hoe voafaritry ny mpanjifa. Ny mari-pana sy ny mari-pana amin'ny Curie dia natao ho fanondroana fotsiny, fa tsy ho fototry ny fanapahan-kevitra. | |||||||||
Tombontsoa:
Ny fampiasana ireo andriamby ireo dia voafehin'ny mari-pana amin'ny faritra midadasika manomboka amin'ny 250ºC ka hatramin'ny 350ºC ary ny hafanan'izy ireo Curie dia mety ho avo be.
710 hatramin'ny 880 ° C. Noho izany, SmCo andriamby manana ny tsara indrindra andriamby fahamarinan-toerana noho ny ambony fanoherana ny mari-pana ambony.
Ny andriamby SmCo dia miavaka amin'ny fanoherana ny harafesina avo lenta, tsy misy coating ilaina amin'ny fiarovana ny tany.
endri-javatra:
Ny fatiantoka amin'ny andriamby SmCo dia ny hakingan'ny fitaovana - lafin-javatra iray izay tsy maintsy raisina manokana mandritra ny fanodinana.
Ny andriamby dia galvanized na mifono amin'ny cathodic electrodeposition ho an'ny fampiharana sasany.
Fampiharana:
Any amin'ny faritra avo ny mari-pana miasa, ny harafesina avo sy ny fanoherana ny oksidia dia tena zava-dehibe. Toy ny, magnetron elektronika,andriambyfampitana ic,
Fitsaboana magnetika, Magnistor, sns.
Ny sanda rehetra voalaza dia nofaritana tamin'ny fampiasana santionany mahazatra araka ny IEC 60404-5. Ireto fepetra manaraka ireto dia ampiasaina ho soatoavina reference ary mety
tsy mitovy. Ny max. Ny mari-pana miasa dia miankina amin'ny dimesion andriamby sy ny fampiharana manokana. Raha mila fanazavana fanampiny dia mifandraisa aminay
injeniera fampiharana.
